您好,欢迎来到济南通宇恒成自动化工程有限公司网站!

    服务热线

    当前位置: 首页- 新闻中心 > 客户见证
    常见问题
    新闻中心

    MNS低压抽屉柜的安装、使用和维护要点!

    发布时间:2023-02-23 来源:/ 浏览量:

    (1)建议靠墙或靠墙安装该装置。安装基础平面要求平整,基础槽钢的水平误差为1/1000,总长度偏差为3mm。
    (1) It is recommended to install the device against the wall or against the wall. The installation foundation plane is required to be flat, the horizontal error of foundation channel steel is 1/1000, and the total length deviation is 3mm.
    (2)当设备到达目的地时,检查包装箱是否完整,或者当设备没有立即安装时,将其存放在干燥干净的地方。
    (2) When the equipment arrives at the destination, first check whether the packing box is complete, or if the equipment is not installed immediately, store it in a dry and clean place.
    (3)建议使用8.8级张力垫圈对所有导电部件进行螺栓固定。
    (3) It is recommended to bolt all conductive parts with Grade 8.8 tension washers.
    (4)连接好电缆,装置底部应封闭,防止小动物爬进机柜造成短路事故。
    (4) Connect the cables, and the bottom of the device should be closed to prevent small animals from climbing into the cabinet and causing short circuit accidents.
    (5)装置安装或调整后,应在投入运行前进行以下检查和试验。
    (5) After installation or adjustment of the device, the following inspections and tests shall be carried out before putting into operation.
    检查设备中电气设备和控制线路的安装是否符合工厂图纸要求。
    Check whether the installation of electrical equipment and control circuit in the equipment meets the requirements of factory drawings.
    用手动操作各种开关,应操动灵活,无异常和卡轧现象。
    Manually operate various switches, which shall be flexible and free from abnormalities and jamming.
    (3)检查机械联锁机构、电气联锁装置动作是否正确可靠,应符合系统要求。
    (3) Check whether the mechanical interlocking mechanism and electrical interlocking device operate correctly and reliably and meet the system requirements.
    MNS低压抽屉柜
    (4)检查主电路和控制电路的绝缘电阻是否符合规定要求。
    (4) Check whether the insulation resistance of the main circuit and control circuit meet the specified requirements.
    检查装置内设置的电气设备的接触是否良好,是否满足该电气设备自身的技术条件。
    Check whether the electrical equipment set in the device is in good contact and meets the technical conditions of the electrical equipment itself.
    检查装置内部是否有异物,各部件的安装螺丝是否松动。
    Check whether there are foreign matters inside the device and whether the mounting screws of each component are loose.
    MNS低压抽屉柜的安装、使用和维护要点相关的内容就讲解到这里了,您对此有怎样的疑惑或者需求就来我们网站咨询!
    That's all about the installation, use and maintenance of MNS low-voltage drawer cabinet. If you have any doubts or needs, please visit our website consulting service
    首页首页 产品产品 电话电话 置顶置顶